01Additive print-on-demand
FDM in PLA, PETG, ABS, ASA, PC, PC-ABS FR, Nylon, Rubber and many more. SLA in Greyscale, Clear, High-Temp, Rigid, Tough and more including patterns for aerospace investment casting.
Quote this processPrecino Limited · UK · Est. 2018
Precision parts,on demand.
Additive manufacturing, laser cutting and engraving, and vacuum-cast polymers for aerospace investment casting, oil & gas, rail and defence. 24/7 production, from one-off to 10,000. Lead times as quick as next day. Instant volume estimate from your STL — then a human engineer sends the quote.
- Production
- 24/7
- Fastest lead
- Next day
- Batch size
- 1–10k
24/7 production · 1 to 10,000
FDM · SLA · laser cut & engrave · vacuum cast
What we actually do
- 24/7 production
- Next-day lead times
- 1–10,000 units
- DFM & CAD
- 10+ years AM
Capabilities
Three processes. One accountable supplier.
Precino is set up for the work that sits between a prototype shop and a full production cell — the parts that have to be right, on a date, in a regulated industry.
01
02Laser cut & engrave
CO2 cutting and engraving of acrylic, plywood, MDF, rubber and leather. Legends, serials and graphics on acrylic, glass and anodised metal. Bed 400 × 375 mm; cuts to 12 mm depending on material.
Quote this process
03Vacuum-cast polymers
Silicone tooling and polyurethane parts when you need 5–50 off that look and feel like production — without committing to hard tooling.
Quote this processWhy Precino
A manufacturer, not a portal.
24/7 production
The shop does not close. Jobs run overnight and at the weekend so programmes keep moving.
As quick as next day
When the date is real, we make it. Next-day dispatch is on the table — not a six-week promise.
One to 10,000
A single pattern, a bridge batch, or a production call-off. Same process, same accountability.
Quoted by an engineer
Not a portal. Instant volume estimate on the page; engineers with over ten years in additive manufacturing send the actual quote.
Design for manufacture
We advise on materials, process and geometry so the part you already have costs less to make — not a rubber stamp on a bad file.
CAD design
Need the model as well as the part? We design production-intent CAD, then manufacture it. One team, one accountable drawing.
Engineering
We challenge the file. Then we make it.
Our engineers have over ten years in additive manufacturing. We look at the job, challenge the file, and tell you how to make it cheaper and more reliable — then we manufacture it 24/7.
Design for manufacture
Send the part you already have. We advise on material, process and geometry changes that actually drop the unit price — wall thickness, orientation, features that cost machine time for no function. DFM is in the quote, not an extra workshop.
CAD design
No file yet? We model it. Concept to production-intent CAD, then print, cut or cast it here. One team owns the design and the part, so the drawing matches what leaves the shop.
Bring a drawing. We’ll tell you how to make it cost less.
Talk to engineeringIndustries
Four sectors. No hobby work.
We manufacture for OEMs and end users who already know the part they need — and need it perfect every single time.
Aerospace
Patterns and gating for investment casting — printed to drawing so foundries can pour aerospace metal parts without cutting a tool. The bulk of our aerospace work sits here.
- Investment patterns
- Gating trees
- Wax / resin masters
- Foundry aids
Oil & gas
Replacement housings, seals, manifolds and offshore-friendly jigs. Fast spares when a drawing exists and the original tool does not.
- Manifolds
- Guards
- Spares
- Test fixtures
Rail
Interior components, cable management and replacements in flame-retardant polymers certified to EN 45545-2 — so rolling stock stays in service without compromising fire performance.
- EN 45545-2
- Flame-retardant
- Interiors
- Refurb parts
Defence
Mostly drone work — airframes, motor mounts, payload bays, gimbal housings and field-replaceable polymer parts. Discreet, UK-based manufacture with a short chain of custody.
- Drone airframes
- Motor mounts
- Payload bays
- Gimbal housings
Instant quote
Upload an STL. Instant estimate.
The figure is a geometry-based estimate — volume and envelope. A Precino engineer then provides the actual quote, with DFM where it saves you money. 24/7 production, one to 10,000, as quick as next day.
Drop your STL here
Binary or ASCII. Up to 40 MB. Volume, bounding box and triangle count are calculated locally.
Process
Four steps. No black box.
- 01
Instant estimate
Drop an STL. We measure volume and envelope in the browser and return a geometry-based estimate — not the quote.
- 02
Tell us the job
Process, material and quantity from 1 to 10,000. Next-day dispatch is available when you need it.
- 03
Engineer quote
A human engineer reviews DFM, advises on material and geometry to cut cost, and sends the actual quote.
- 04
24/7 manufacture
The shop runs around the clock. Packed and dispatched as quick as next day for aerospace, energy, rail and defence.
Have a drawing pack, not just an STL?
Talk to engineeringThe company
Precino Limited. Incorporated 2018. Harrogate.
A UK Limited company supplying additive manufacturing print-on-demand, laser cutting and engraving, and vacuum-cast polymers for Aerospace, Oil & Gas, Rail and Defence sectors.
No franchise network. No quoting bureau. Quoted by humans with a human touch.
- Company
- Precino Limited
- Company no.
- 11228287
- VAT
- GB 297 5982 26
- Incorporated
- 2018
- Core
- Additive on demand
- Also
- Laser cut & engrave
- Location
- Harrogate
- Also
- DFM & CAD design
Contact
Speak to engineering, not a ticket queue.
Drawings, STEP files, NDA requests and call-offs — send them here. For a priced STL, use Instant quote for the estimate. An engineer always follows with the quote.
- CompanyPrecino Limited
- Company no.11228287
- VATGB 297 5982 26
- Typical replyWithin 24 hours